2.3.2.3 Angle Target

The Angle Target parameter defines the total number of degrees the screw must be rotated to complete the screwing or tightening process.

It represents the full rotation distance from the start to the final tightened position. A higher Angle Target means the screw will need to be turned more, simulating a longer or finer thread.

For example:

• An Angle Target of 360 means one full rotation is required.

• An Angle Target of 1080 means three full rotations are needed to fully tighten the screw.

This setting helps control how long or how detailed the screwing interaction should feel in VR.